Here are some of the other dimensions you may need whilst planning your decorations…

Ladder – The long ladder above the storage cupboard doors is approximately 8.5 m long.

Beams – The beautiful scissor beams and drop posts have hooks at the base so you can loop your decorations using a lightweight extendable pole from ground level.

There are five sets of beams (numbered 1 to 5 starting from the Balcony end).  The first two sets (beams 1 and 2) are 2.5 m apart, the rest (beams 2,3,4 and 5) are 3.1 m apart.

The distance straight across the hall between the hooks is approximately 8.8 m, and the diagonal distance between each set about 9.4 m, except of course between sets 1 and 2 which is about 9 m.

None of these measurements take account of any ‘droop’ you might want to have or taking lights/bunting up to the top hooks on the drop posts.To simplify – if you want to hang bunting/lights from hook to hook across the width of the hall (as shown in one of the photos below) you will need 8.8 – 9 m per width.

Pegs – Wooden pegs are fixed into the horizontal beams at each end of the Main Hall, again for you to attach/loop your decorations around.  There are 7 in the beam beneath the Balcony and 5 in the beam that divides the big window.

GableWindow (and horizontal beam above) – 6 m wide

Balcony (and horizontal beam below) – 8.2 m wide

Internal front door (with pegged beam above) – 2.48 m wide

Side Ledges/cills in The Tallet – 7 m long each

French Windows/Door in The Tallet – 1.45 m wide

The Clock House – 4 m square to outside of vertical posts (which are about 18 cm across)

Round Tables – 5’6” diameter (Please ask if you would like us to provide you with a guide to table linen sizes)

Trestle Tables – 6’ x 2’6” (3) and 4’ x 2’6” (3)

Vintage Cake Stand – Flat mirrored surface 35 cm across

Modern Cake Stand – Three tiers, designed for 12″, 9″ and 6″ cakes on boards.

Chalk Board – Writing area (without frame) is 110 x 76 cm.  Please bring your own pens.